Steam Turbine Test Rig

Picture










Non IBR Boiler(Oil/Gas Fired) 1. Fire Tube 2. Capacity : 500 Kgs/Hr 3. Max. Pressure: 6 Bar 4. Working Pressure: 3 Bar 5. Type of Fuel : HSD 6. Max. Fuel consumption : 12Lts/Hr Accessories: 1. Automatic Burner 2. Safety valve 3. High Pressure Muti stage Jet pump 4. Fuel Tank of capacity 200 Lts with stand 5. Automatic water level controller 6. Steam valve, Air release valve and Blow down valve 7. PRV station 8. Steam Separator 9. Digital Temperature Indicator and Controller 10. Pressure Switch 11. Dia 150mm Chimney X 4mts long 12. Fuel line with filter 13. Water line with Non Return valve Steam Turbine 1. Single Stage, single Nozzle impulse turbine 2. Out put power : 1 Kw 3. Oil cooled Bearing 4. Speed 3000rpm 5. Digital Non Contact Tachometer 1. Make: Kirloskar/Ncon/CG 2. Power 1 KW 3. Speed : 3000 RPM Accessories; 1. Panel board with Digital volt meter and Ammeter. 2. Electrical loading system 3. Panel board for Boiler operation Condenser 1. Type : Water cooled, Shell and Tube type 2. Digital Temperature Indicator 3. 2HP cooling water pump 4. Flow meter to measure water flow 5. IBR spares will be used.

Super Sonic Wind Tunnel

Picture




Blow down Supersonic Wind Tunnel of 1.5Mach Number with following specifications and accessories; 
1. 15HP Air Compressor to develop maximum pressure of 25Bar. 
2. After cooler 
3. Electronic Auto Drainer 
4. Refrigerated Air Dryer 
5. Heatless Dryer 
6. 10000Lts Capacity Air Receiver 
7. Settling Chamber
8. C-D Nozzle 
9. Test section size of 37.5mm X 50mm X 150mm length 
10. Silencer 11. Shadow graph apparatus 
12. Scilieren Apparatus 
13. Test duration is 30 seconds maximum 
14. Maximum Mach number is 1.5

Sub Sonic Wind Tunnel

Picture






Subsonic Wind Tunnel with following specifications and Accessories; 
1. 72m/sec velocity Blower M.S fabricated 
2. 300mm X 300mm Test Section 
3. Pitot Static tube 
4. 20 Tube manometer 
5. Airfoil model with 20 tapings 
6. Cylindrical model with tapings
7. Strain gauge setup to measure lift and Drag

CNC Trainer Lathe

Picture











1.       Accuracy                              : Resolution on X axis 0.001mm on Diameter

  Resolution on Z Axis 0.005mm

  Mechanical Repeatability 0.002mm

2.       Table                                     : Distance between centers 350mm

  Traverse X axis cross slide 50mm

  Traverse Z axis longitudinal slide 150mm

  Work piece size (diameter), with chuck 100mm

  Turning length with chuck 250mm

  Tail stock sleeve stroke 20-30mm

  Rapid Traverse 700mm per minute.

3.       Controller                            : Industrial Grade controller 220v operating voltage

4.       Software                             : Windows XP based software.

5.       Spindle                                 : Spindle bore 20mm. Spindle speed range 100 to 5000rpm

6.       Machinable Material      : Wood, Wax, Aluminium, Bronze, Copper